How Much Does Appliance Repair Cost?

Discover the standard price of hiring professional appliance repair from Speedy Appliance Repair:

Most kitchens are full of electrical appliances. An electrical stove, dishwasher or refrigerator needs the right wires. If any appliance is improperly installed, it poses a real chance of starting a fire. In order to guarantee your electrical appliances are in good shape, it is important to enlist a trained service for appliance repair.

DIY electrical repair for appliances is not a recommended idea. There are a handful small repairs where DIY might be a consideration. In those times, just be sure to use the proper tools and to always turn off the power.

Repairing larger appliances, however, is much more difficult. Don’t plan on ”do-it-yourself” repair. Your range, for one example, can require either a 250- or 125-volt circuit whether it is entirely gas-powered or electrical, and you’ll need a minimum of two 20-amp, 125-volt circuits to power smaller appliances. These types of circuits can each carry a couple of electrical outlets, but do not overload them — which will mean, a third is needed.

The risk of a short (which could mean serious injury or death) during any kind of bigger job in most cases is not worth it. It’s best to call a professional in CITY, STATE.

You will want to search for appliance repair services in CITY on on social media. Look for companies with several reviews. Or ask for a recommendation from a coworker if you’re experiencing difficulties with a stove, microwave or refrigerator.

Hiring appliance repair services starts with finding a service in CITY that has experience doing service of kitchen appliances. Some services are appliance-specific, and don’t provide repair for all types of appliances.

The number one reason several appliance repair services aren’t qualified to service a kitchen appliance is due to the amount of electrical appliances in a kitchen that need water to run. Most refrigerators need water to make ice in the freezer and dishwashers always use water to operate. Water is potentially dangerous when it comes to electrical repairs.

If electrical repairs are not completed correctly and a waterline ruptures, as an example, there is a very strong possibility of electrocution. Electricity and water do not mix.

Which is why you want a CITY repairman who can deal with both.

Certified appliance repair technicians often cost close to $45 to $60 per hour for their work, and independent contractors could cost between $75 and $120 an hour. This could sound like too much, but it is better to pay a more expensive price for excellent work. If a repair company charges lower than $35 per hour, be suspicious.

Be sure the contractor has a permit from CITY for any kind of electrical service. Some questionable repairmen will argue that they do not need a permit, but never believe it. Always confirm with CITY officials.

Most technicians in CITY can charge a minimum cost for their time, from $50 to $60. You’ll pay the complete fee no matter if the repair is performed, so have a small list on-hand of appliances for the company to inspect.

The national average is $130 for refrigerator repairs – local services in CITY sometimes charge $75 to $140 per hour. Expect a $60 to $75 trip fee too for them to drive and troubleshoot the problem.

The prices for new kitchen appliances can range between $375 and $7,500. The wide range is dependent on the type of kitchen appliance, such as a high-price refrigerator compared to a low-cost oven.

Fixing or replacing an electrical appliance is one of the most difficult repair projects you can require in a kitchen.

One way to sidestep these types of electrical issues is listening very attentively to a contractor when he completes an estimate for repair. Specific types of wire should be used depending on the appliance, and the wiring colors (for ground and neutral) might are different as local laws or requirements are revised.

Plus, several jurisdictions now require arc fault protection for kitchen circuits in addition to ground fault circuit interruption (GFCI) protection. If the technician fails to mention this, or suggests you do not “need” them, it’s time to hire a different repairman.

Also, make sure to watch a appliance repairman attentively when he performs the initial review of the refrigerator. If it’s a new appliance he is installing, ask if it can use the exact same circuit or if it needs an enhancement because there are noticeable size and electrical power usage differences in the latest models. The same applies to dishwashers and stoves.

professionals have to be willing to articulate what they are going to do, why it is needed and go over each piece of the final fee, which includes materials, labor and sometimes miscellaneous. Some appliance repair companies willing to wave the travel fee if repair is completed.

OTHER RESOURCES:

Appliance Repair Tips
Appliance Safety
Repair or Replace Appliances
Refrigerator Parts